catV2 CAT Genes CAT Gene Annotations Genes and Gene Predictions Description This track represents the gene models for the Marmoset assembly, calJac4, generated using Comparative Annotation Toolkit (CAT). CAT can be found on GitHub: https://github.com/ComparativeGenomicsToolkit/Comparative-Annotation-Toolkit Display Conventions and Configuration This track follows the display conventions for gene prediction tracks. The exons for putative non-coding genes and untranslated regions are represented by relatively thin blocks, while those for coding open reading frames are thicker. Gene names are displayed in 'pack' or 'full' mode. More information about each gene can be found by clicking on the specific gene/transcript model. The following color key is used: Blue: protein coding Green: non-coding Purple: novel predictions from augCGP/augPB The following metadata is available by clicking on the transcript. Gene name: gene symbolic name Status of CDS start annotation: is the start of the CDS fully annotated Status of CDS end annotation: is the end of the CDS fully annotated Exon frame: comma-separate list of per-exon frames, 0,1,2, or -1 if no frame for an exon Transcript ID: CAT assigned unique transcript id Transcript type: type of transcript Gene ID: CAT assigned unique gene id Gene type: type of gene Source gene ID: source GENCODE gene id Source transcript ID: source GENCODE transcript id Alignment ID: unique alignment id for TransMap based transcripts Alternative source transcripts: ??? Paralogous alignment IDs: comma separated list of alignments identified as possible paralogs for this transcript Unfiltered paralogous alignment IDs: paralogous alignments before filtering Collapsed Gene IDs: if this gene was a part of a gene family collapse, this field reports the of identifiers of the genes collapsed together Collapsed Gene Names: common names of the collapsed genes Frameshifted relative to source?: is the transcript frameshifted relative to source_transcript/ Exon support in reference annotation: was this exon supported by the reference annotation? Intron support in reference annotation: was this intron exon supported by the reference annotation? Transcript class: for projection transcripts, it is maybe ortholog; for de-novo transcripts, will be one of poor_alignment, possible_paralog, putative_novel_isoform, or putative_novel Transcript mode(s): Comma separated list of transcript modes Valid start codon: has a valid start-codon Valid stop codon: has a valid stop-codon Proper multiple of 3 ORF: is there a full valid st RNA intron support: RNA-Seq support introns RNA exon support: RNA-Seq support exons Is this transcript supported by IsoSeq?: True if the transcript is supported by Iso-Seq Methods Genome annotation for the calJac4 assembly was performed using Comparative Annotation Toolkit (CAT). CAT leverages whole-genome alignments generated by Cactus to transfer annotations from one source genome to one or more target genomes. CAT also runs AUGUSTUS in both the comparative gene prediction mode and in a single-genome mode that utilizes Iso-Seq data to predict alternative isoforms. CAT then combines all of these annotation methods into a final consensus annotation set that represents orthology relationships as well as species-specific information. A Cactus alignment was produced with nine primate assemblies and mouse as an outgroup. The GENCODE v33 annotation for GRCh38 was used as a reference to map onto the calJac4 assembly. 20 IsoSeq libraries were included as evidence for the CAT annotation pipeline. Assemblies used in Cactus alignment Bonobo Pan paniscus Mhudiblu_PPA_v0 GCA_013052645.1 Chimp Pan troglodytes Clint_PTRv2 GCF_002880755.1 Gibbon Nomascus leucogenys Asia_NLE_v1 GCF_006542625.1 Gorilla Gorilla gorilla gorilla Kamilah_GGO_v0 GCF_008122165.1 Human Homo sapiens GRCh38 GCA_000001405 Marmoset Callithrix jacchus Callithrix_jacchus_cj1700_1.0 GCA_009663435.1 Orangutan Pongo abelii Susie_PABv2 GCF_002880775.1 Rhesus Macaca mulatta Mmul_10 GCF_003339765.1 Owl_monkey &#xa0   unsubmitted Mouse Mus musculus GRCm38 GCA_000001635.2 Data Access For automated analysis, the genome annotation is stored in a bigGenePred format file that can be downloaded from the download server at cat-consensus-v2.bb. Annotations can be converted to ASCII text by our tool bigBedToBed which can be compiled from the source code or downloaded as a precompiled binary for your system. Instructions for downloading source code and binaries can be found here. The tool can also be used to obtain only features within a given range, for example: bigBedToBed http://hgdownload.soe.ucsc.edu/gbdb/calJac4/cat/cat-consensus-v2.bb -chrom=chr6 -start=0 -end=1000000 stdout Please refer to our mailing list archives for questions, or our Data Access FAQ for more information. Credits The alignments were generated by, Marina Haukness, Mark Diekhans, and Ian Fiddes. References Armstrong J, Hickey G, Diekhans M, Fiddes IT, Novak AM, Deran A, Fang Q, Xie D, Feng S, Stiller J et al. Progressive Cactus is a multiple-genome aligner for the thousand-genome era. Nature. 2020 Nov;587(7833):246-251. PMID: 33177663; PMC: PMC7673649 Fiddes IT, Armstrong J, Diekhans M, Nachtweide S, Kronenberg ZN, Underwood JG, Gordon D, Earl D, Keane T, Eichler EE et al. Comparative Annotation Toolkit (CAT)-simultaneous clade and personal genome annotation. Genome Res. 2018 Jul;28(7):1029-1038. PMID: 29884752; PMC: PMC6028123 Stanke M, Steinkamp R, Waack S, Morgenstern B. AUGUSTUS: a web server for gene finding in eukaryotes. Nucleic Acids Res. 2004 Jul 1;32(Web Server issue):W309-12. PMID: 15215400; PMC: PMC441517 
cpgIslandExt CpG Islands CpG Islands (Islands < 300 Bases are Light Green) Expression and Regulation Description CpG islands are associated with genes, particularly housekeeping genes, in vertebrates. CpG islands are typically common near transcription start sites and may be associated with promoter regions. Normally a C (cytosine) base followed immediately by a G (guanine) base (a CpG) is rare in vertebrate DNA because the Cs in such an arrangement tend to be methylated. This methylation helps distinguish the newly synthesized DNA strand from the parent strand, which aids in the final stages of DNA proofreading after duplication. However, over evolutionary time, methylated Cs tend to turn into Ts because of spontaneous deamination. The result is that CpGs are relatively rare unless there is selective pressure to keep them or a region is not methylated for some other reason, perhaps having to do with the regulation of gene expression. CpG islands are regions where CpGs are present at significantly higher levels than is typical for the genome as a whole. The unmasked version of the track displays potential CpG islands that exist in repeat regions and would otherwise not be visible in the repeat masked version. By default, only the masked version of the track is displayed. To view the unmasked version, change the visibility settings in the track controls at the top of this page. Methods CpG islands were predicted by searching the sequence one base at a time, scoring each dinucleotide (+17 for CG and -1 for others) and identifying maximally scoring segments. Each segment was then evaluated for the following criteria: GC content of 50% or greater length greater than 200 bp ratio greater than 0.6 of observed number of CG dinucleotides to the expected number on the basis of the number of Gs and Cs in the segment The entire genome sequence, masking areas included, was used for the construction of the track Unmasked CpG. The track CpG Islands is constructed on the sequence after all masked sequence is removed. The CpG count is the number of CG dinucleotides in the island. The Percentage CpG is the ratio of CpG nucleotide bases (twice the CpG count) to the length. The ratio of observed to expected CpG is calculated according to the formula (cited in Gardiner-Garden et al. (1987)): Obs/Exp CpG = Number of CpG * N / (Number of C * Number of G) where N = length of sequence. The calculation of the track data is performed by the following command sequence: twoBitToFa assembly.2bit stdout | maskOutFa stdin hard stdout \ | cpg_lh /dev/stdin 2&gt; cpg_lh.err \ | awk '{&dollar;2 = &dollar;2 - 1; width = &dollar;3 - &dollar;2; printf("%s\t%d\t%s\t%s %s\t%s\t%s\t%0.0f\t%0.1f\t%s\t%s\n", &dollar;1, &dollar;2, &dollar;3, &dollar;5, &dollar;6, width, &dollar;6, width*&dollar;7*0.01, 100.0*2*&dollar;6/width, &dollar;7, &dollar;9);}' \ | sort -k1,1 -k2,2n &gt; cpgIsland.bed The unmasked track data is constructed from twoBitToFa -noMask output for the twoBitToFa command. Data access CpG islands and its associated tables can be explored interactively using the REST API, the Table Browser or the Data Integrator. All the tables can also be queried directly from our public MySQL servers, with more information available on our help page as well as on our blog. The source for the cpg_lh program can be obtained from src/utils/cpgIslandExt/. The cpg_lh program binary can be obtained from: http://hgdownload.soe.ucsc.edu/admin/exe/linux.x86_64/cpg_lh (choose "save file") Credits This track was generated using a modification of a program developed by G. Miklem and L. Hillier (unpublished). References Gardiner-Garden M, Frommer M. CpG islands in vertebrate genomes. J Mol Biol. 1987 Jul 20;196(2):261-82. PMID: 3656447 
cpgIslandSuper CpG Islands CpG Islands (Islands < 300 Bases are Light Green) Expression and Regulation Description CpG islands are associated with genes, particularly housekeeping genes, in vertebrates. CpG islands are typically common near transcription start sites and may be associated with promoter regions. Normally a C (cytosine) base followed immediately by a G (guanine) base (a CpG) is rare in vertebrate DNA because the Cs in such an arrangement tend to be methylated. This methylation helps distinguish the newly synthesized DNA strand from the parent strand, which aids in the final stages of DNA proofreading after duplication. However, over evolutionary time, methylated Cs tend to turn into Ts because of spontaneous deamination. The result is that CpGs are relatively rare unless there is selective pressure to keep them or a region is not methylated for some other reason, perhaps having to do with the regulation of gene expression. CpG islands are regions where CpGs are present at significantly higher levels than is typical for the genome as a whole. The unmasked version of the track displays potential CpG islands that exist in repeat regions and would otherwise not be visible in the repeat masked version. By default, only the masked version of the track is displayed. To view the unmasked version, change the visibility settings in the track controls at the top of this page. Methods CpG islands were predicted by searching the sequence one base at a time, scoring each dinucleotide (+17 for CG and -1 for others) and identifying maximally scoring segments. Each segment was then evaluated for the following criteria: GC content of 50% or greater length greater than 200 bp ratio greater than 0.6 of observed number of CG dinucleotides to the expected number on the basis of the number of Gs and Cs in the segment The entire genome sequence, masking areas included, was used for the construction of the track Unmasked CpG. The track CpG Islands is constructed on the sequence after all masked sequence is removed. The CpG count is the number of CG dinucleotides in the island. The Percentage CpG is the ratio of CpG nucleotide bases (twice the CpG count) to the length. The ratio of observed to expected CpG is calculated according to the formula (cited in Gardiner-Garden et al. (1987)): Obs/Exp CpG = Number of CpG * N / (Number of C * Number of G) where N = length of sequence. The calculation of the track data is performed by the following command sequence: twoBitToFa assembly.2bit stdout | maskOutFa stdin hard stdout \ | cpg_lh /dev/stdin 2&gt; cpg_lh.err \ | awk '{&dollar;2 = &dollar;2 - 1; width = &dollar;3 - &dollar;2; printf("%s\t%d\t%s\t%s %s\t%s\t%s\t%0.0f\t%0.1f\t%s\t%s\n", &dollar;1, &dollar;2, &dollar;3, &dollar;5, &dollar;6, width, &dollar;6, width*&dollar;7*0.01, 100.0*2*&dollar;6/width, &dollar;7, &dollar;9);}' \ | sort -k1,1 -k2,2n &gt; cpgIsland.bed The unmasked track data is constructed from twoBitToFa -noMask output for the twoBitToFa command. Data access CpG islands and its associated tables can be explored interactively using the REST API, the Table Browser or the Data Integrator. All the tables can also be queried directly from our public MySQL servers, with more information available on our help page as well as on our blog. The source for the cpg_lh program can be obtained from src/utils/cpgIslandExt/. The cpg_lh program binary can be obtained from: http://hgdownload.soe.ucsc.edu/admin/exe/linux.x86_64/cpg_lh (choose "save file") Credits This track was generated using a modification of a program developed by G. Miklem and L. Hillier (unpublished). References Gardiner-Garden M, Frommer M. CpG islands in vertebrate genomes. J Mol Biol. 1987 Jul 20;196(2):261-82. PMID: 3656447 
rmsk RepeatMasker Repeating Elements by RepeatMasker Variation and Repeats Description This track was created by using Arian Smit's RepeatMasker program, which screens DNA sequences for interspersed repeats and low complexity DNA sequences. The program outputs a detailed annotation of the repeats that are present in the query sequence (represented by this track), as well as a modified version of the query sequence in which all the annotated repeats have been masked (generally available on the Downloads page). RepeatMasker uses the Repbase Update library of repeats from the Genetic Information Research Institute (GIRI). Repbase Update is described in Jurka (2000) in the References section below. Some newer assemblies have been made with Dfam, not Repbase. You can find the details for how we make our database data here in our &quot;makeDb/doc/&quot; directory. Display Conventions and Configuration In full display mode, this track displays up to ten different classes of repeats: Short interspersed nuclear elements (SINE), which include ALUs Long interspersed nuclear elements (LINE) Long terminal repeat elements (LTR), which include retroposons DNA repeat elements (DNA) Simple repeats (micro-satellites) Low complexity repeats Satellite repeats RNA repeats (including RNA, tRNA, rRNA, snRNA, scRNA, srpRNA) Other repeats, which includes class RC (Rolling Circle) Unknown The level of color shading in the graphical display reflects the amount of base mismatch, base deletion, and base insertion associated with a repeat element. The higher the combined number of these, the lighter the shading. A &quot;?&quot; at the end of the &quot;Family&quot; or &quot;Class&quot; (for example, DNA?) signifies that the curator was unsure of the classification. At some point in the future, either the &quot;?&quot; will be removed or the classification will be changed. Methods Data are generated using the RepeatMasker -s flag. Additional flags may be used for certain organisms. Repeats are soft-masked. Alignments may extend through repeats, but are not permitted to initiate in them. See the FAQ for more information. Credits Thanks to Arian Smit, Robert Hubley and GIRI for providing the tools and repeat libraries used to generate this track. References Smit AFA, Hubley R, Green P. RepeatMasker Open-3.0. http://www.repeatmasker.org. 1996-2010. Repbase Update is described in: Jurka J. Repbase Update: a database and an electronic journal of repetitive elements. Trends Genet. 2000 Sep;16(9):418-420. PMID: 10973072 For a discussion of repeats in mammalian genomes, see: Smit AF. Interspersed repeats and other mementos of transposable elements in mammalian genomes. Curr Opin Genet Dev. 1999 Dec;9(6):657-63. PMID: 10607616 Smit AF. The origin of interspersed repeats in the human genome. Curr Opin Genet Dev. 1996 Dec;6(6):743-8. PMID: 8994846 
refSeqComposite NCBI RefSeq RefSeq gene predictions from NCBI Genes and Gene Predictions Description The NCBI RefSeq Genes composite track shows marmoset protein-coding and non-protein-coding genes taken from the NCBI RNA reference sequences collection (RefSeq). All subtracks use coordinates provided by RefSeq, except for the UCSC RefSeq track, which UCSC produces by realigning the RefSeq RNAs to the genome. This realignment may result in occasional differences between the annotation coordinates provided by UCSC and NCBI. For RNA-seq analysis, we advise using NCBI aligned tables like RefSeq All or RefSeq Curated. See the Methods section for more details about how the different tracks were created. Please visit NCBI's Feedback for Gene and Reference Sequences (RefSeq) page to make suggestions, submit additions and corrections, or ask for help concerning RefSeq records. For more information on the different gene tracks, see our Genes FAQ. Display Conventions and Configuration This track is a composite track that contains differing data sets. To show only a selected set of subtracks, uncheck the boxes next to the tracks that you wish to hide. Note: Not all subtracts are available on all assemblies. The possible subtracks include: RefSeq aligned annotations and UCSC alignment of RefSeq annotations RefSeq All &ndash; all curated and predicted annotations provided by RefSeq. RefSeq Curated &ndash; subset of RefSeq All that includes only those annotations whose accessions begin with NM, NR, NP or YP. (NP and YP are used only for protein-coding genes on the mitochondrion; YP is used for human only.) They were manually curated, based on publications describing transcripts and manual reviews of evidence which includes EST and full-length cDNA alignments, protein sequences, splice sites and any other evidence available in databases or the scientific literature. The resulting sequences can differ from the genome, they exist independently from a particular human genome build, and so must be aligned to the genome to create a track. The "RefSeq Curated" track is NCBI's mapping of these transcripts to the genome. Another alignment track exists for these, the "UCSC RefSeq" track (see beloow). RefSeq Predicted &ndash; subset of RefSeq All that includes those annotations whose accessions begin with XM or XR. They were predicted based on protein, cDNA, EST and RNA-seq alignments to the genome assembly by the NCBI Gnomon prediction software. RefSeq Other &ndash; all other annotations produced by the RefSeq group that do not fit the requirements for inclusion in the RefSeq Curated or the RefSeq Predicted tracks. Examples are untranscribed pseudogenes or gene clusters, such as HOX or protocadherin alpha. They were manually curated from publications or databases but are not typical transcribed genes. RefSeq Alignments &ndash; alignments of RefSeq RNAs to the marmoset genome provided by the RefSeq group, following the display conventions for PSL tracks. RefSeq Diffs &ndash; alignment differences between the marmoset reference genome(s) and RefSeq curated transcripts. (Track not currently available for every assembly.) UCSC RefSeq &ndash; annotations generated from UCSC's realignment of RNAs with NM and NR accessions to the marmoset genome. This track was previously known as the &quot;RefSeq Genes&quot; track. RefSeq Select (subset, only on hg38) &ndash; Subset of RefSeq Curated, transcripts marked as part of the RefSeq Select dataset. A single Select transcript is chosen as representative for each protein-coding gene. See NCBI RefSeq Select. RefSeq HGMD (subset) &ndash; Subset of RefSeq Curated, transcripts annotated by the Human Gene Mutation Database. This track is only available on the human genomes hg19 and hg38. It is the most restricted RefSeq subset, targeting clinical diagnostics. The RefSeq All, RefSeq Curated, RefSeq Predicted, and UCSC RefSeq tracks follow the display conventions for gene prediction tracks. The color shading indicates the level of review the RefSeq record has undergone: predicted (light), provisional (medium), or reviewed (dark), as defined by RefSeq. Color Level of review Reviewed: the RefSeq record has been reviewed by NCBI staff or by a collaborator. The NCBI review process includes assessing available sequence data and the literature. Some RefSeq records may incorporate expanded sequence and annotation information. Provisional: the RefSeq record has not yet been subject to individual review. The initial sequence-to-gene association has been established by outside collaborators or NCBI staff. Predicted: the RefSeq record has not yet been subject to individual review, and some aspect of the RefSeq record is predicted. The item labels and codon display properties for features within this track can be configured through the check-box controls at the top of the track description page. To adjust the settings for an individual subtrack, click the wrench icon next to the track name in the subtrack list . Label: By default, items are labeled by gene name. Click the appropriate Label option to display the accession name or OMIM identifier instead of the gene name, show all or a subset of these labels including the gene name, OMIM identifier and accession names, or turn off the label completely. Codon coloring: This track has an optional codon coloring feature that allows users to quickly validate and compare gene predictions. To display codon colors, select the genomic codons option from the Color track by codons pull-down menu. For more information about this feature, go to the Coloring Gene Predictions and Annotations by Codon page. The RefSeq Diffs track contains five different types of inconsistency between the reference genome sequence and the RefSeq transcript sequences. The five types of differences are as follows: mismatch &ndash; aligned but mismatching bases, plus HGVS g. to show the genomic change required to match the transcript and HGVS c./n. to show the transcript change required to match the genome. short gap &ndash; genomic gaps that are too small to be introns (arbitrary cutoff of &lt; 45 bp), most likely insertions/deletion variants or errors, with HGVS g. and c./n. showing differences. shift gap &ndash; shortGap items whose placement could be shifted left and/or right on the genome due to repetitive sequence, with HGVS c./n. position range of ambiguous region in transcript. Here, thin and thick lines are used -- the thin line shows the span of the repetitive sequence, and the thick line shows the rightmost shifted gap. double gap &ndash; genomic gaps that are long enough to be introns but that skip over transcript sequence (invisible in default setting), with HGVS c./n. deletion. skipped &ndash; sequence at the beginning or end of a transcript that is not aligned to the genome (invisible in default setting), with HGVS c./n. deletion HGVS Terminology (Human Genome Variation Society): g. = genomic sequence ; c. = coding DNA sequence ; n. = non-coding RNA reference sequence. When reporting HGVS with RefSeq sequences, to make sure that results from research articles can be mapped to the genome unambiguously, please specify the RefSeq annotation release displayed on the transcript's Genome Browser details page and also the RefSeq transcript ID with version (e.g. NM_012309.4 not NM_012309). Methods Tracks contained in the RefSeq annotation and RefSeq RNA alignment tracks were created at UCSC using data from the NCBI RefSeq project. Data files were downloaded from RefSeq in GFF file format and converted to the genePred and PSL table formats for display in the Genome Browser. Information about the NCBI annotation pipeline can be found here. The RefSeq Diffs track is generated by UCSC using NCBI's RefSeq RNA alignments. The UCSC RefSeq Genes track is constructed using the same methods as previous RefSeq Genes tracks. RefSeq RNAs were aligned against the marmoset genome using BLAT. Those with an alignment of less than 15% were discarded. When a single RNA aligned in multiple places, the alignment having the highest base identity was identified. Only alignments having a base identity level within 0.1% of the best and at least 96% base identity with the genomic sequence were kept. Data Access The raw data for these tracks can be accessed in multiple ways. It can be explored interactively using the REST API, Table Browser or Data Integrator. The tables can also be accessed programmatically through our public MySQL server or downloaded from our downloads server for local processing. The previous track versions are available in the archives of our downloads server. You can also access any RefSeq table entries in JSON format through our JSON API. The data in the RefSeq Other and RefSeq Diffs tracks are organized in bigBed file format; more information about accessing the information in this bigBed file can be found below. The other subtracks are associated with database tables as follows: genePred format: RefSeq All - ncbiRefSeq RefSeq Curated - ncbiRefSeqCurated RefSeq Predicted - ncbiRefSeqPredicted UCSC RefSeq - refGene PSL format: RefSeq Alignments - ncbiRefSeqPsl The first column of each of these tables is &quot;bin&quot;. This column is designed to speed up access for display in the Genome Browser, but can be safely ignored in downstream analysis. You can read more about the bin indexing system here. The annotations in the RefSeqOther and RefSeqDiffs tracks are stored in bigBed files, which can be obtained from our downloads server here, ncbiRefSeqOther.bb and ncbiRefSeqDiffs.bb. Individual regions or the whole set of genome-wide annotations can be obtained using our tool bigBedToBed which can be compiled from the source code or downloaded as a precompiled binary for your system from the utilities directory linked below. For example, to extract only annotations in a given region, you could use the following command: bigBedToBed http://hgdownload.soe.ucsc.edu/gbdb/calJac4/ncbiRefSeq/ncbiRefSeqOther.bb -chrom=chr16 -start=34990190 -end=36727467 stdout You can download a GTF format version of the RefSeq All table from the GTF downloads directory. The genePred format tracks can also be converted to GTF format using the genePredToGtf utility, available from the utilities directory on the UCSC downloads server. The utility can be run from the command line like so: genePredToGtf calJac4 ncbiRefSeqPredicted ncbiRefSeqPredicted.gtf Note that using genePredToGtf in this manner accesses our public MySQL server, and you therefore must set up your hg.conf as described on the MySQL page linked near the beginning of the Data Access section. A file containing the RNA sequences in FASTA format for all items in the RefSeq All, RefSeq Curated, and RefSeq Predicted tracks can be found on our downloads server here. Please refer to our mailing list archives for questions. Previous versions of the ncbiRefSeq set of tracks can be found on our archive download server. Credits This track was produced at UCSC from data generated by scientists worldwide and curated by the NCBI RefSeq project. References Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 Pruitt KD, Brown GR, Hiatt SM, Thibaud-Nissen F, Astashyn A, Ermolaeva O, Farrell CM, Hart J, Landrum MJ, McGarvey KM et al. RefSeq: an update on mammalian reference sequences. Nucleic Acids Res. 2014 Jan;42(Database issue):D756-63. PMID: 24259432; PMC: PMC3965018 Pruitt KD, Tatusova T, Maglott DR. NCBI Reference Sequence (RefSeq): a curated non-redundant sequence database of genomes, transcripts and proteins. Nucleic Acids Res. 2005 Jan 1;33(Database issue):D501-4. PMID: 15608248; PMC: PMC539979 
refGene UCSC RefSeq UCSC annotations of RefSeq RNAs (NM_* and NR_*) Genes and Gene Predictions Description The RefSeq Genes track shows known marmoset protein-coding and non-protein-coding genes taken from the NCBI RNA reference sequences collection (RefSeq). The data underlying this track are updated weekly. Please visit the Feedback for Gene and Reference Sequences (RefSeq) page to make suggestions, submit additions and corrections, or ask for help concerning RefSeq records. For more information on the different gene tracks, see our Genes FAQ. Display Conventions and Configuration This track follows the display conventions for gene prediction tracks. The color shading indicates the level of review the RefSeq record has undergone: predicted (light), provisional (medium), reviewed (dark). The item labels and display colors of features within this track can be configured through the controls at the top of the track description page. Label: By default, items are labeled by gene name. Click the appropriate Label option to display the accession name instead of the gene name, show both the gene and accession names, or turn off the label completely. Codon coloring: This track contains an optional codon coloring feature that allows users to quickly validate and compare gene predictions. To display codon colors, select the genomic codons option from the Color track by codons pull-down menu. For more information about this feature, go to the Coloring Gene Predictions and Annotations by Codon page. Hide non-coding genes: By default, both the protein-coding and non-protein-coding genes are displayed. If you wish to see only the coding genes, click this box. Methods RefSeq RNAs were aligned against the marmoset genome using BLAT. Those with an alignment of less than 15% were discarded. When a single RNA aligned in multiple places, the alignment having the highest base identity was identified. Only alignments having a base identity level within 0.1% of the best and at least 96% base identity with the genomic sequence were kept. Credits This track was produced at UCSC from RNA sequence data generated by scientists worldwide and curated by the NCBI RefSeq project. References Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 Pruitt KD, Brown GR, Hiatt SM, Thibaud-Nissen F, Astashyn A, Ermolaeva O, Farrell CM, Hart J, Landrum MJ, McGarvey KM et al. RefSeq: an update on mammalian reference sequences. Nucleic Acids Res. 2014 Jan;42(Database issue):D756-63. PMID: 24259432; PMC: PMC3965018 Pruitt KD, Tatusova T, Maglott DR. NCBI Reference Sequence (RefSeq): a curated non-redundant sequence database of genomes, transcripts and proteins. Nucleic Acids Res. 2005 Jan 1;33(Database issue):D501-4. PMID: 15608248; PMC: PMC539979 
ncbiRefSeqPsl RefSeq Alignments RefSeq Alignments of RNAs Genes and Gene Predictions 
ncbiRefSeqOther RefSeq Other NCBI RefSeq Other Annotations (not NM_*, NR_*, XM_*, XR_*, NP_* or YP_*) Genes and Gene Predictions 
ncbiRefSeqPredicted RefSeq Predicted NCBI RefSeq genes, predicted subset (XM_* or XR_*) Genes and Gene Predictions 
ncbiRefSeqCurated RefSeq Curated NCBI RefSeq genes, curated subset (NM_*, NR_*, NP_* or YP_*) Genes and Gene Predictions 
ncbiRefSeq RefSeq All NCBI RefSeq genes, curated and predicted (NM_*, XM_*, NR_*, XR_*, NP_*, YP_*) Genes and Gene Predictions 
cpgIslandExtUnmasked Unmasked CpG CpG Islands on All Sequence (Islands < 300 Bases are Light Green) Expression and Regulation Description CpG islands are associated with genes, particularly housekeeping genes, in vertebrates. CpG islands are typically common near transcription start sites and may be associated with promoter regions. Normally a C (cytosine) base followed immediately by a G (guanine) base (a CpG) is rare in vertebrate DNA because the Cs in such an arrangement tend to be methylated. This methylation helps distinguish the newly synthesized DNA strand from the parent strand, which aids in the final stages of DNA proofreading after duplication. However, over evolutionary time, methylated Cs tend to turn into Ts because of spontaneous deamination. The result is that CpGs are relatively rare unless there is selective pressure to keep them or a region is not methylated for some other reason, perhaps having to do with the regulation of gene expression. CpG islands are regions where CpGs are present at significantly higher levels than is typical for the genome as a whole. The unmasked version of the track displays potential CpG islands that exist in repeat regions and would otherwise not be visible in the repeat masked version. By default, only the masked version of the track is displayed. To view the unmasked version, change the visibility settings in the track controls at the top of this page. Methods CpG islands were predicted by searching the sequence one base at a time, scoring each dinucleotide (+17 for CG and -1 for others) and identifying maximally scoring segments. Each segment was then evaluated for the following criteria: GC content of 50% or greater length greater than 200 bp ratio greater than 0.6 of observed number of CG dinucleotides to the expected number on the basis of the number of Gs and Cs in the segment The entire genome sequence, masking areas included, was used for the construction of the track Unmasked CpG. The track CpG Islands is constructed on the sequence after all masked sequence is removed. The CpG count is the number of CG dinucleotides in the island. The Percentage CpG is the ratio of CpG nucleotide bases (twice the CpG count) to the length. The ratio of observed to expected CpG is calculated according to the formula (cited in Gardiner-Garden et al. (1987)): Obs/Exp CpG = Number of CpG * N / (Number of C * Number of G) where N = length of sequence. The calculation of the track data is performed by the following command sequence: twoBitToFa assembly.2bit stdout | maskOutFa stdin hard stdout \ | cpg_lh /dev/stdin 2&gt; cpg_lh.err \ | awk '{&dollar;2 = &dollar;2 - 1; width = &dollar;3 - &dollar;2; printf("%s\t%d\t%s\t%s %s\t%s\t%s\t%0.0f\t%0.1f\t%s\t%s\n", &dollar;1, &dollar;2, &dollar;3, &dollar;5, &dollar;6, width, &dollar;6, width*&dollar;7*0.01, 100.0*2*&dollar;6/width, &dollar;7, &dollar;9);}' \ | sort -k1,1 -k2,2n &gt; cpgIsland.bed The unmasked track data is constructed from twoBitToFa -noMask output for the twoBitToFa command. Data access CpG islands and its associated tables can be explored interactively using the REST API, the Table Browser or the Data Integrator. All the tables can also be queried directly from our public MySQL servers, with more information available on our help page as well as on our blog. The source for the cpg_lh program can be obtained from src/utils/cpgIslandExt/. The cpg_lh program binary can be obtained from: http://hgdownload.soe.ucsc.edu/admin/exe/linux.x86_64/cpg_lh (choose "save file") Credits This track was generated using a modification of a program developed by G. Miklem and L. Hillier (unpublished). References Gardiner-Garden M, Frommer M. CpG islands in vertebrate genomes. J Mol Biol. 1987 Jul 20;196(2):261-82. PMID: 3656447 
gold Assembly Assembly from Fragments Mapping and Sequencing Description This track shows the sequences used in the May 2020 marmoset genome assembly. Genome assembly procedures are covered in the NCBI assembly documentation. NCBI also provides specific information about this assembly. The definition of this assembly is from the AGP file delivered with the sequence. The NCBI document AGP Specification describes the format of the AGP file. In dense mode, this track depicts the contigs that make up the currently viewed scaffold. Contig boundaries are distinguished by the use of alternating gold and brown coloration. Where gaps exist between contigs, spaces are shown between the gold and brown blocks. The relative order and orientation of the contigs within a scaffold is always known; therefore, a line is drawn in the graphical display to bridge the blocks. Component types found in this track (with counts of that type in parentheses): W - whole genome shotgun (1,360) F - finished sequence (62) A - active finishing (6) O - one other sequence (chrM/KM588314.1) 
augustusGene AUGUSTUS AUGUSTUS ab initio gene predictions v3.1 Genes and Gene Predictions Description This track shows ab initio predictions from the program AUGUSTUS (version 3.1). The predictions are based on the genome sequence alone. For more information on the different gene tracks, see our Genes FAQ. Methods Statistical signal models were built for splice sites, branch-point patterns, translation start sites, and the poly-A signal. Furthermore, models were built for the sequence content of protein-coding and non-coding regions as well as for the length distributions of different exon and intron types. Detailed descriptions of most of these different models can be found in Mario Stanke's dissertation. This track shows the most likely gene structure according to a Semi-Markov Conditional Random Field model. Alternative splicing transcripts were obtained with a sampling algorithm (--alternatives-from-sampling=true --sample=100 --minexonintronprob=0.2 --minmeanexonintronprob=0.5 --maxtracks=3 --temperature=2). The different models used by Augustus were trained on a number of different species-specific gene sets, which included 1000-2000 training gene structures. The --species option allows one to choose the species used for training the models. Different training species were used for the --species option when generating these predictions for different groups of assemblies. Assembly Group Training Species Fish zebrafish Birds chicken Human and all other vertebrates human Nematodes caenorhabditis Drosophila fly A. mellifera honeybee1 A. gambiae culex S. cerevisiae saccharomyces This table describes which training species was used for a particular group of assemblies. When available, the closest related training species was used. Credits Thanks to the Stanke lab for providing the AUGUSTUS program. The training for the chicken version was done by Stefanie K&ouml;nig and the training for the human and zebrafish versions was done by Mario Stanke. References Stanke M, Diekhans M, Baertsch R, Haussler D. Using native and syntenically mapped cDNA alignments to improve de novo gene finding. Bioinformatics. 2008 Mar 1;24(5):637-44. PMID: 18218656 Stanke M, Waack S. Gene prediction with a hidden Markov model and a new intron submodel. Bioinformatics. 2003 Oct;19 Suppl 2:ii215-25. PMID: 14534192 
cytoBandIdeo Chromosome Band (Ideogram) Ideogram for Orientation Mapping and Sequencing 
gap Gap Gap Locations Mapping and Sequencing Description This track shows the gaps in the May 2020 marmoset genome assembly. Genome assembly procedures are covered in the NCBI assembly documentation. NCBI also provides specific information about this assembly. The definition of the gaps in this assembly is from the AGP file delivered with the sequence. The NCBI document AGP Specification describes the format of the AGP file. Gaps are represented as black boxes in this track. If the relative order and orientation of the contigs on either side of the gap is supported by read pair data, it is a bridged gap and a white line is drawn through the black box representing the gap. This assembly contains the following principal types of gaps: contig - gaps between contigs in scaffolds (count: 15; size range: 100 - 50,000 bases) centromere - gaps for centromeres are included when they can be reasonably localized (count: 22; all of size 1,000,000 bases) scaffold - gaps between scaffolds in chromosome assemblies (count: 341; size range: 13 - 765,705 bases) 
gc5BaseBw GC Percent GC Percent in 5-Base Windows Mapping and Sequencing Description The GC percent track shows the percentage of G (guanine) and C (cytosine) bases in 5-base windows. High GC content is typically associated with gene-rich areas. This track may be configured in a variety of ways to highlight different apsects of the displayed information. Click the &quot;Graph configuration help&quot; link for an explanation of the configuration options. Credits The data and presentation of this graph were prepared by Hiram Clawson. 
genscan Genscan Genes Genscan Gene Predictions Genes and Gene Predictions Description This track shows predictions from the Genscan program written by Chris Burge. The predictions are based on transcriptional, translational and donor/acceptor splicing signals as well as the length and compositional distributions of exons, introns and intergenic regions. For more information on the different gene tracks, see our Genes FAQ. Display Conventions and Configuration This track follows the display conventions for gene prediction tracks. The track description page offers the following filter and configuration options: Color track by codons: Select the genomic codons option to color and label each codon in a zoomed-in display to facilitate validation and comparison of gene predictions. Go to the Coloring Gene Predictions and Annotations by Codon page for more information about this feature. Methods For a description of the Genscan program and the model that underlies it, refer to Burge and Karlin (1997) in the References section below. The splice site models used are described in more detail in Burge (1998) below. Credits Thanks to Chris Burge for providing the Genscan program. References Burge C. Modeling Dependencies in Pre-mRNA Splicing Signals. In: Salzberg S, Searls D, Kasif S, editors. Computational Methods in Molecular Biology. Amsterdam: Elsevier Science; 1998. p. 127-163. Burge C, Karlin S. Prediction of complete gene structures in human genomic DNA. J. Mol. Biol. 1997 Apr 25;268(1):78-94. PMID: 9149143 
ucscToINSDC INSDC Accession at INSDC - International Nucleotide Sequence Database Collaboration Mapping and Sequencing Description This track associates UCSC Genome Browser chromosome names to accession names from the International Nucleotide Sequence Database Collaboration (INSDC). The data were downloaded from the NCBI assembly database. Credits The data for this track was prepared by Hiram Clawson. 
nestedRepeats Interrupted Rpts Fragments of Interrupted Repeats Joined by RepeatMasker ID Variation and Repeats Description This track shows joined fragments of interrupted repeats extracted from the output of the RepeatMasker program which screens DNA sequences for interspersed repeats and low complexity DNA sequences using the Repbase Update library of repeats from the Genetic Information Research Institute (GIRI). Repbase Update is described in Jurka (2000) in the References section below. The detailed annotations from RepeatMasker are in the RepeatMasker track. This track shows fragments of original repeat insertions which have been interrupted by insertions of younger repeats or through local rearrangements. The fragments are joined using the ID column of RepeatMasker output. Display Conventions and Configuration In pack or full mode, each interrupted repeat is displayed as boxes (fragments) joined by horizontal lines, labeled with the repeat name. If all fragments are on the same strand, arrows are added to the horizontal line to indicate the strand. In dense or squish mode, labels and arrows are omitted and in dense mode, all items are collapsed to fit on a single row. Items are shaded according to the average identity score of their fragments. Usually, the shade of an item is similar to the shades of its fragments unless some fragments are much more diverged than others. The score displayed above is the average identity score, clipped to a range of 50% - 100% and then mapped to the range 0 - 1000 for shading in the browser. Methods UCSC has used the most current versions of the RepeatMasker software and repeat libraries available to generate these data. Note that these versions may be newer than those that are publicly available on the Internet. Data are generated using the RepeatMasker -s flag. Additional flags may be used for certain organisms. See the FAQ for more information. Credits Thanks to Arian Smit, Robert Hubley and GIRI for providing the tools and repeat libraries used to generate this track. References Smit AFA, Hubley R, Green P. RepeatMasker Open-3.0. http://www.repeatmasker.org. 1996-2010. Repbase Update is described in: Jurka J. Repbase Update: a database and an electronic journal of repetitive elements. Trends Genet. 2000 Sep;16(9):418-420. PMID: 10973072 For a discussion of repeats in mammalian genomes, see: Smit AF. Interspersed repeats and other mementos of transposable elements in mammalian genomes. Curr Opin Genet Dev. 1999 Dec;9(6):657-63. PMID: 10607616 Smit AF. The origin of interspersed repeats in the human genome. Curr Opin Genet Dev. 1996 Dec;6(6):743-8. PMID: 8994846 
est Marmoset ESTs Marmoset ESTs Including Unspliced mRNA and EST Description This track shows alignments between marmoset expressed sequence tags (ESTs) in GenBank and the genome. ESTs are single-read sequences, typically about 500 bases in length, that usually represent fragments of transcribed genes. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. In dense display mode, the items that are more darkly shaded indicate matches of better quality. The strand information (+/-) indicates the direction of the match between the EST and the matching genomic sequence. It bears no relationship to the direction of transcription of the RNA with which it might be associated. The description page for this track has a filter that can be used to change the display mode, alter the color, and include/exclude a subset of items within the track. This may be helpful when many items are shown in the track display, especially when only some are relevant to the current task. To use the filter: Type a term in one or more of the text boxes to filter the EST display. For example, to apply the filter to all ESTs expressed in a specific organ, type the name of the organ in the tissue box. To view the list of valid terms for each text box, consult the table in the Table Browser that corresponds to the factor on which you wish to filter. For example, the &quot;tissue&quot; table contains all the types of tissues that can be entered into the tissue text box. Multiple terms may be entered at once, separated by a space. Wildcards may also be used in the filter. If filtering on more than one value, choose the desired combination logic. If &quot;and&quot; is selected, only ESTs that match all filter criteria will be highlighted. If &quot;or&quot; is selected, ESTs that match any one of the filter criteria will be highlighted. Choose the color or display characteristic that should be used to highlight or include/exclude the filtered items. If &quot;exclude&quot; is chosen, the browser will not display ESTs that match the filter criteria. If &quot;include&quot; is selected, the browser will display only those ESTs that match the filter criteria. This track may also be configured to display base labeling, a feature that allows the user to display all bases in the aligning sequence or only those that differ from the genomic sequence. For more information about this option, go to the Base Coloring for Alignment Tracks page. Several types of alignment gap may also be colored; for more information, go to the Alignment Insertion/Deletion Display Options page. Methods To make an EST, RNA is isolated from cells and reverse transcribed into cDNA. Typically, the cDNA is cloned into a plasmid vector and a read is taken from the 5' and/or 3' primer. For most &mdash; but not all &mdash; ESTs, the reverse transcription is primed by an oligo-dT, which hybridizes with the poly-A tail of mature mRNA. The reverse transcriptase may or may not make it to the 5' end of the mRNA, which may or may not be degraded. In general, the 3' ESTs mark the end of transcription reasonably well, but the 5' ESTs may end at any point within the transcript. Some of the newer cap-selected libraries cover transcription start reasonably well. Before the cap-selection techniques emerged, some projects used random rather than poly-A priming in an attempt to retrieve sequence distant from the 3' end. These projects were successful at this, but as a side effect also deposited sequences from unprocessed mRNA and perhaps even genomic sequences into the EST databases. Even outside of the random-primed projects, there is a degree of non-mRNA contamination. Because of this, a single unspliced EST should be viewed with considerable skepticism. To generate this track, marmoset ESTs from GenBank were aligned against the genome using blat. Note that the maximum intron length allowed by blat is 750,000 bases, which may eliminate some ESTs with very long introns that might otherwise align. When a single EST aligned in multiple places, the alignment having the highest base identity was identified. Only alignments having a base identity level within 0.5% of the best and at least 96% base identity with the genomic sequence were kept. Credits This track was produced at UCSC from EST sequence data submitted to the international public sequence databases by scientists worldwide. References Benson DA, Cavanaugh M, Clark K, Karsch-Mizrachi I, Lipman DJ, Ostell J, Sayers EW. GenBank. Nucleic Acids Res. 2013 Jan;41(Database issue):D36-42. PMID: 23193287; PMC: PMC3531190 Benson DA, Karsch-Mizrachi I, Lipman DJ, Ostell J, Wheeler DL. GenBank: update. Nucleic Acids Res. 2004 Jan 1;32(Database issue):D23-6. PMID: 14681350; PMC: PMC308779 Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 
mrna Marmoset mRNAs Marmoset mRNAs from GenBank mRNA and EST Description The mRNA track shows alignments between marmoset mRNAs in GenBank and the genome. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. In dense display mode, the items that are more darkly shaded indicate matches of better quality. The description page for this track has a filter that can be used to change the display mode, alter the color, and include/exclude a subset of items within the track. This may be helpful when many items are shown in the track display, especially when only some are relevant to the current task. To use the filter: Type a term in one or more of the text boxes to filter the mRNA display. For example, to apply the filter to all mRNAs expressed in a specific organ, type the name of the organ in the tissue box. To view the list of valid terms for each text box, consult the table in the Table Browser that corresponds to the factor on which you wish to filter. For example, the &quot;tissue&quot; table contains all the types of tissues that can be entered into the tissue text box. Multiple terms may be entered at once, separated by a space. Wildcards may also be used in the filter. If filtering on more than one value, choose the desired combination logic. If &quot;and&quot; is selected, only mRNAs that match all filter criteria will be highlighted. If &quot;or&quot; is selected, mRNAs that match any one of the filter criteria will be highlighted. Choose the color or display characteristic that should be used to highlight or include/exclude the filtered items. If &quot;exclude&quot; is chosen, the browser will not display mRNAs that match the filter criteria. If &quot;include&quot; is selected, the browser will display only those mRNAs that match the filter criteria. This track may also be configured to display codon coloring, a feature that allows the user to quickly compare mRNAs against the genomic sequence. For more information about this option, go to the Codon and Base Coloring for Alignment Tracks page. Several types of alignment gap may also be colored; for more information, go to the Alignment Insertion/Deletion Display Options page. Methods GenBank marmoset mRNAs were aligned against the genome using the blat program. When a single mRNA aligned in multiple places, the alignment having the highest base identity was found. Only alignments having a base identity level within 0.5% of the best and at least 96% base identity with the genomic sequence were kept. Credits The mRNA track was produced at UCSC from mRNA sequence data submitted to the international public sequence databases by scientists worldwide. References Benson DA, Cavanaugh M, Clark K, Karsch-Mizrachi I, Lipman DJ, Ostell J, Sayers EW. GenBank. Nucleic Acids Res. 2013 Jan;41(Database issue):D36-42. PMID: 23193287; PMC: PMC3531190 Benson DA, Karsch-Mizrachi I, Lipman DJ, Ostell J, Wheeler DL. GenBank: update. Nucleic Acids Res. 2004 Jan 1;32(Database issue):D23-6. PMID: 14681350; PMC: PMC308779 Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 
microsat Microsatellite Microsatellites - Di-nucleotide and Tri-nucleotide Repeats Variation and Repeats Description This track displays regions that are likely to be useful as microsatellite markers. These are sequences of at least 15 perfect di-nucleotide and tri-nucleotide repeats and tend to be highly polymorphic in the population. Methods The data shown in this track are a subset of the Simple Repeats track, selecting only those repeats of period 2 and 3, with 100% identity and no indels and with at least 15 copies of the repeat. The Simple Repeats track is created using the Tandem Repeats Finder. For more information about this program, see Benson (1999). Credits Tandem Repeats Finder was written by Gary Benson. References Benson G. Tandem repeats finder: a program to analyze DNA sequences. Nucleic Acids Res. 1999 Jan 15;27(2):573-80. PMID: 9862982; PMC: PMC148217 
xenoMrna Other mRNAs Non-Marmoset mRNAs from GenBank mRNA and EST Description This track displays translated blat alignments of vertebrate and invertebrate mRNA in GenBank from organisms other than marmoset. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. In dense display mode, the items that are more darkly shaded indicate matches of better quality. The strand information (+/-) for this track is in two parts. The first + indicates the orientation of the query sequence whose translated protein produced the match (here always 5' to 3', hence +). The second + or - indicates the orientation of the matching translated genomic sequence. Because the two orientations of a DNA sequence give different predicted protein sequences, there are four combinations. ++ is not the same as --, nor is +- the same as -+. The description page for this track has a filter that can be used to change the display mode, alter the color, and include/exclude a subset of items within the track. This may be helpful when many items are shown in the track display, especially when only some are relevant to the current task. To use the filter: Type a term in one or more of the text boxes to filter the mRNA display. For example, to apply the filter to all mRNAs expressed in a specific organ, type the name of the organ in the tissue box. To view the list of valid terms for each text box, consult the table in the Table Browser that corresponds to the factor on which you wish to filter. For example, the &quot;tissue&quot; table contains all the types of tissues that can be entered into the tissue text box. Multiple terms may be entered at once, separated by a space. Wildcards may also be used in the filter. If filtering on more than one value, choose the desired combination logic. If &quot;and&quot; is selected, only mRNAs that match all filter criteria will be highlighted. If &quot;or&quot; is selected, mRNAs that match any one of the filter criteria will be highlighted. Choose the color or display characteristic that should be used to highlight or include/exclude the filtered items. If &quot;exclude&quot; is chosen, the browser will not display mRNAs that match the filter criteria. If &quot;include&quot; is selected, the browser will display only those mRNAs that match the filter criteria. This track may also be configured to display codon coloring, a feature that allows the user to quickly compare mRNAs against the genomic sequence. For more information about this option, go to the Codon and Base Coloring for Alignment Tracks page. Several types of alignment gap may also be colored; for more information, go to the Alignment Insertion/Deletion Display Options page. Methods The mRNAs were aligned against the marmoset genome using translated blat. When a single mRNA aligned in multiple places, the alignment having the highest base identity was found. Only those alignments having a base identity level within 1% of the best and at least 25% base identity with the genomic sequence were kept. Credits The mRNA track was produced at UCSC from mRNA sequence data submitted to the international public sequence databases by scientists worldwide. References Benson DA, Cavanaugh M, Clark K, Karsch-Mizrachi I, Lipman DJ, Ostell J, Sayers EW. GenBank. Nucleic Acids Res. 2013 Jan;41(Database issue):D36-42. PMID: 23193287; PMC: PMC3531190 Benson DA, Karsch-Mizrachi I, Lipman DJ, Ostell J, Wheeler DL. GenBank: update. Nucleic Acids Res. 2004 Jan 1;32(Database issue):D23-6. PMID: 14681350; PMC: PMC308779 Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 
xenoRefGene Other RefSeq Non-Marmoset RefSeq Genes Genes and Gene Predictions Description This track shows known protein-coding and non-protein-coding genes for organisms other than marmoset, taken from the NCBI RNA reference sequences collection (RefSeq). The data underlying this track are updated weekly. Display Conventions and Configuration This track follows the display conventions for gene prediction tracks. The color shading indicates the level of review the RefSeq record has undergone: predicted (light), provisional (medium), reviewed (dark). The item labels and display colors of features within this track can be configured through the controls at the top of the track description page. Label: By default, items are labeled by gene name. Click the appropriate Label option to display the accession name instead of the gene name, show both the gene and accession names, or turn off the label completely. Codon coloring: This track contains an optional codon coloring feature that allows users to quickly validate and compare gene predictions. To display codon colors, select the genomic codons option from the Color track by codons pull-down menu. For more information about this feature, go to the Coloring Gene Predictions and Annotations by Codon page. Hide non-coding genes: By default, both the protein-coding and non-protein-coding genes are displayed. If you wish to see only the coding genes, click this box. Methods The RNAs were aligned against the marmoset genome using blat; those with an alignment of less than 15% were discarded. When a single RNA aligned in multiple places, the alignment having the highest base identity was identified. Only alignments having a base identity level within 0.5% of the best and at least 25% base identity with the genomic sequence were kept. Credits This track was produced at UCSC from RNA sequence data generated by scientists worldwide and curated by the NCBI RefSeq project. References Kent WJ. BLAT--the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 Pruitt KD, Brown GR, Hiatt SM, Thibaud-Nissen F, Astashyn A, Ermolaeva O, Farrell CM, Hart J, Landrum MJ, McGarvey KM et al. RefSeq: an update on mammalian reference sequences. Nucleic Acids Res. 2014 Jan;42(Database issue):D756-63. PMID: 24259432; PMC: PMC3965018 Pruitt KD, Tatusova T, Maglott DR. NCBI Reference Sequence (RefSeq): a curated non-redundant sequence database of genomes, transcripts and proteins. Nucleic Acids Res. 2005 Jan 1;33(Database issue):D501-4. PMID: 15608248; PMC: PMC539979 
ucscToRefSeq RefSeq Acc RefSeq Accession Mapping and Sequencing Description This track associates UCSC Genome Browser chromosome names to accession identifiers from the NCBI Reference Sequence Database (RefSeq). The data were downloaded from the NCBI assembly database. Credits The data for this track was prepared by Hiram Clawson. 
simpleRepeat Simple Repeats Simple Tandem Repeats by TRF Variation and Repeats Description This track displays simple tandem repeats (possibly imperfect repeats) located by Tandem Repeats Finder (TRF) which is specialized for this purpose. These repeats can occur within coding regions of genes and may be quite polymorphic. Repeat expansions are sometimes associated with specific diseases. Methods For more information about the TRF program, see Benson (1999). Credits TRF was written by Gary Benson. References Benson G. Tandem repeats finder: a program to analyze DNA sequences. Nucleic Acids Res. 1999 Jan 15;27(2):573-80. PMID: 9862982; PMC: PMC148217 
intronEst Spliced ESTs Marmoset ESTs That Have Been Spliced mRNA and EST Description This track shows alignments between marmoset expressed sequence tags (ESTs) in GenBank and the genome that show signs of splicing when aligned against the genome. ESTs are single-read sequences, typically about 500 bases in length, that usually represent fragments of transcribed genes. To be considered spliced, an EST must show evidence of at least one canonical intron (i.e., the genomic sequence between EST alignment blocks must be at least 32 bases in length and have GT/AG ends). By requiring splicing, the level of contamination in the EST databases is drastically reduced at the expense of eliminating many genuine 3' ESTs. For a display of all ESTs (including unspliced), see the marmoset EST track. Display Conventions and Configuration This track follows the display conventions for PSL alignment tracks. In dense display mode, darker shading indicates a larger number of aligned ESTs. The strand information (+/-) indicates the direction of the match between the EST and the matching genomic sequence. It bears no relationship to the direction of transcription of the RNA with which it might be associated. The description page for this track has a filter that can be used to change the display mode, alter the color, and include/exclude a subset of items within the track. This may be helpful when many items are shown in the track display, especially when only some are relevant to the current task. To use the filter: Type a term in one or more of the text boxes to filter the EST display. For example, to apply the filter to all ESTs expressed in a specific organ, type the name of the organ in the tissue box. To view the list of valid terms for each text box, consult the table in the Table Browser that corresponds to the factor on which you wish to filter. For example, the &quot;tissue&quot; table contains all the types of tissues that can be entered into the tissue text box. Multiple terms may be entered at once, separated by a space. Wildcards may also be used in the filter. If filtering on more than one value, choose the desired combination logic. If &quot;and&quot; is selected, only ESTs that match all filter criteria will be highlighted. If &quot;or&quot; is selected, ESTs that match any one of the filter criteria will be highlighted. Choose the color or display characteristic that should be used to highlight or include/exclude the filtered items. If &quot;exclude&quot; is chosen, the browser will not display ESTs that match the filter criteria. If &quot;include&quot; is selected, the browser will display only those ESTs that match the filter criteria. This track may also be configured to display base labeling, a feature that allows the user to display all bases in the aligning sequence or only those that differ from the genomic sequence. For more information about this option, go to the Base Coloring for Alignment Tracks page. Several types of alignment gap may also be colored; for more information, go to the Alignment Insertion/Deletion Display Options page. Methods To make an EST, RNA is isolated from cells and reverse transcribed into cDNA. Typically, the cDNA is cloned into a plasmid vector and a read is taken from the 5' and/or 3' primer. For most &mdash; but not all &mdash; ESTs, the reverse transcription is primed by an oligo-dT, which hybridizes with the poly-A tail of mature mRNA. The reverse transcriptase may or may not make it to the 5' end of the mRNA, which may or may not be degraded. In general, the 3' ESTs mark the end of transcription reasonably well, but the 5' ESTs may end at any point within the transcript. Some of the newer cap-selected libraries cover transcription start reasonably well. Before the cap-selection techniques emerged, some projects used random rather than poly-A priming in an attempt to retrieve sequence distant from the 3' end. These projects were successful at this, but as a side effect also deposited sequences from unprocessed mRNA and perhaps even genomic sequences into the EST databases. Even outside of the random-primed projects, there is a degree of non-mRNA contamination. Because of this, a single unspliced EST should be viewed with considerable skepticism. To generate this track, marmoset ESTs from GenBank were aligned against the genome using blat. Note that the maximum intron length allowed by blat is 750,000 bases, which may eliminate some ESTs with very long introns that might otherwise align. When a single EST aligned in multiple places, the alignment having the highest base identity was identified. Only alignments having a base identity level within 0.5% of the best and at least 96% base identity with the genomic sequence are displayed in this track. Credits This track was produced at UCSC from EST sequence data submitted to the international public sequence databases by scientists worldwide. References Benson DA, Cavanaugh M, Clark K, Karsch-Mizrachi I, Lipman DJ, Ostell J, Sayers EW. GenBank. Nucleic Acids Res. 2013 Jan;41(Database issue):D36-42. PMID: 23193287; PMC: PMC3531190 Benson DA, Karsch-Mizrachi I, Lipman DJ, Ostell J, Wheeler DL. GenBank: update. Nucleic Acids Res. 2004 Jan 1;32(Database issue):D23-6. PMID: 14681350; PMC: PMC308779 Kent WJ. BLAT - the BLAST-like alignment tool. Genome Res. 2002 Apr;12(4):656-64. PMID: 11932250; PMC: PMC187518 
uniprot UniProt UniProt SwissProt/TrEMBL Protein Annotations Genes and Gene Predictions Description This track shows protein sequences and annotations on them from the UniProt/SwissProt database, mapped to genomic coordinates. UniProt/SwissProt data has been curated from scientific publications by the UniProt staff, UniProt/TrEMBL data has been predicted by various computational algorithms. The annotations are divided into multiple subtracks, based on their &quot;feature type&quot; in UniProt. The first two subtracks below - one for SwissProt, one for TrEMBL - show the alignments of protein sequences to the genome, all other tracks below are the protein annotations mapped through these alignments to the genome. Track Name Description UCSC Alignment, SwissProt = curated protein sequences Protein sequences from SwissProt mapped to the genome. All other tracks are (start,end) SwissProt annotations on these sequences mapped through this alignment. Even protein sequences without a single curated annotation (splice isoforms) are visible in this track. Each UniProt protein has one main isoform, which is colored in dark. Alternative isoforms are sequences that do not have annotations on them and are colored in light-blue. They can be hidden with the TrEMBL/Isoform filter (see below). UCSC Alignment, TrEMBL = predicted protein sequences Protein sequences from TrEMBL mapped to the genome. All other tracks below are (start,end) TrEMBL annotations mapped to the genome using this track. This track is hidden by default. To show it, click its checkbox on the track configuration page. UniProt Signal Peptides Regions found in proteins destined to be secreted, generally cleaved from mature protein. UniProt Extracellular Domains Protein domains with the comment &quot;Extracellular&quot;. UniProt Transmembrane Domains Protein domains of the type &quot;Transmembrane&quot;. UniProt Cytoplasmic Domains Protein domains with the comment &quot;Cytoplasmic&quot;. UniProt Polypeptide Chains Polypeptide chain in mature protein after post-processing. UniProt Regions of Interest Regions that have been experimentally defined, such as the role of a region in mediating protein-protein interactions or some other biological process. UniProt Domains Protein domains, zinc finger regions and topological domains. UniProt Disulfide Bonds Disulfide bonds. UniProt Amino Acid Modifications Glycosylation sites, modified residues and lipid moiety-binding regions. UniProt Amino Acid Mutations Mutagenesis sites and sequence variants. UniProt Protein Primary/Secondary Structure Annotations Beta strands, helices, coiled-coil regions and turns. UniProt Sequence Conflicts Differences between Genbank sequences and the UniProt sequence. UniProt Repeats Regions of repeated sequence motifs or repeated domains. UniProt Other Annotations All other annotations, e.g. compositional bias For consistency and convenience for users of mutation-related tracks, the subtrack &quot;UniProt/SwissProt Variants&quot; is a copy of the track &quot;UniProt Variants&quot; in the track group &quot;Phenotype and Literature&quot;, or &quot;Variation and Repeats&quot;, depending on the assembly. Display Conventions and Configuration Genomic locations of UniProt/SwissProt annotations are labeled with a short name for the type of annotation (e.g. &quot;glyco&quot;, &quot;disulf bond&quot;, &quot;Signal peptide&quot; etc.). A click on them shows the full annotation and provides a link to the UniProt/SwissProt record for more details. TrEMBL annotations are always shown in light blue, except in the Signal Peptides, Extracellular Domains, Transmembrane Domains, and Cytoplamsic domains subtracks. Mouse over a feature to see the full UniProt annotation comment. For variants, the mouse over will show the full name of the UniProt disease acronym. The subtracks for domains related to subcellular location are sorted from outside to inside of the cell: Signal peptide, extracellular, transmembrane, and cytoplasmic. In the &quot;UniProt Modifications&quot; track, lipoification sites are highlighted in dark blue, glycosylation sites in dark green, and phosphorylation in light green. Duplicate annotations are removed as far as possible: if a TrEMBL annotation has the same genome position and same feature type, comment, disease and mutated amino acids as a SwissProt annotation, it is not shown again. Two annotations mapped through different protein sequence alignments but with the same genome coordinates are only shown once. On the configuration page of this track, you can choose to hide any TrEMBL annotations. This filter will also hide the UniProt alternative isoform protein sequences because both types of information are less relevant to most users. Please contact us if you want more detailed filtering features. Note that for the human hg38 assembly and SwissProt annotations, there also is a public track hub prepared by UniProt itself, with genome annotations maintained by UniProt using their own mapping method based on those Gencode/Ensembl gene models that are annotated in UniProt for a given protein. For proteins that differ from the genome, UniProt's mapping method will, in most cases, map a protein and its annotations to an unexpected location (see below for details on UCSC's mapping method). Methods Briefly, UniProt protein sequences were aligned to the transcripts associated with the protein, the top-scoring alignments were retained, and the result was projected to the genome through a transcript-to-genome alignment. Depending on the genome, the transcript-genome alignments was either provided by the source database (NBCI RefSeq), created at UCSC (UCSC RefSeq) or derived from the transcripts (Ensembl/Augustus). The transcript set is NCBI RefSeq for hg38, UCSC RefSeq for hg19 (due to alt/fix haplotype misplacements in the NCBI RefSeq set on hg19). For other genomes, RefSeq, Ensembl and Augustus are tried, in this order. The resulting protein-genome alignments of this process are available in the file formats for liftOver or pslMap from our data archive (see "Data Access" section below). An important step of the mapping process protein -&gt; transcript -&gt; genome is filtering the alignment from protein to transcript. Due to differences between the UniProt proteins and the transcripts (proteins were made many years before the transcripts were made, and human genomes have variants), the transcript with the highest BLAST score when aligning the protein to all transcripts is not always the correct transcript for a protein sequence. Therefore, the protein sequence is aligned to only a very short list of one or sometimes more transcripts, selected by a three-step procedure: Use transcripts directly annotated by UniProt: for organisms that have a RefSeq transcript track, proteins are aligned to the RefSeq transcripts that are annotated by UniProt for this particular protein. Use transcripts for NCBI Gene ID annotated by UniProt: If no transcripts are annotated on the protein, or the annotated ones have been deprecated by NCBI, but a NCBI Gene ID is annotated, the RefSeq transcripts for this Gene ID are used. This can result in multiple matching transcripts for a protein. Use best matching transcript: If no NCBI Gene is annotated, then BLAST scores are used to pick the transcripts. There can be multiple transcripts for one protein, as their coding sequences can be identical. All transcripts within 1% of the highest observed BLAST score are used. For strategy 2 and 3, many of the transcripts found do not differ in coding sequence, so the resulting alignments on the genome will be identical. Therefore, any identical alignments are removed in a final filtering step. The details page of these alignments will contain a list of all transcripts that result in the same protein-genome alignment. On hg38, only a handful of edge cases (pseudogenes, very recently added proteins) remain in 2023 where strategy 3 has to be used. In other words, when an NCBI or UCSC RefSeq track is used for the mapping and to align a protein sequence to the correct transcript, we use a three stage process: If UniProt has annotated a given RefSeq transcript for a given protein sequence, the protein is aligned to this transcript. Any difference in the version suffix is tolerated in this comparison. If no transcript is annotated or the transcript cannot be found in the NCBI/UCSC RefSeq track, the UniProt-annotated NCBI Gene ID is resolved to a set of NCBI RefSeq transcript IDs via the most current version of NCBI genes tables. Only the top match of the resulting alignments and all others within 1% of its score are used for the mapping. If no transcript can be found after step (2), the protein is aligned to all transcripts, the top match, and all others within 1% of its score are used. This system was designed to resolve the problem of incorrect mappings of proteins, mostly on hg38, due to differences between the SwissProt sequences and the genome reference sequence, which has changed since the proteins were defined. The problem is most pronounced for gene families composed of either very repetitive or very similar proteins. To make sure that the alignments always go to the best chromosome location, all _alt and _fix reference patch sequences are ignored for the alignment, so the patches are entirely free of UniProt annotations. Please contact us if you have feedback on this process or example edge cases. We are not aware of a way to evaluate the results completely and in an automated manner. Proteins were aligned to transcripts with TBLASTN, converted to PSL, filtered with pslReps (93% query coverage, keep alignments within top 1% score), lifted to genome positions with pslMap and filtered again with pslReps. UniProt annotations were obtained from the UniProt XML file. The UniProt annotations were then mapped to the genome through the alignment described above using the pslMap program. This approach draws heavily on the LS-SNP pipeline by Mark Diekhans. Like all Genome Browser source code, the main script used to build this track can be found on Github. Older releases This track is automatically updated on an ongoing basis, every 2-3 months. The current version name is always shown on the track details page, it includes the release of UniProt, the version of the transcript set and a unique MD5 that is based on the protein sequences, the transcript sequences, the mapping file between both and the transcript-genome alignment. The exact transcript that was used for the alignment is shown when clicking a protein alignment in one of the two alignment tracks. For reproducibility of older analysis results and for manual inspection, previous versions of this track are available for browsing in the form of the UCSC UniProt Archive Track Hub (click this link to connect the hub now). The underlying data of all releases of this track (past and current) can be obtained from our downloads server, including the UniProt protein-to-genome alignment. Data Access The raw data of the current track can be explored interactively with the Table Browser, or the Data Integrator. For automated analysis, the genome annotation is stored in a bigBed file that can be downloaded from the download server. The exact filenames can be found in the track configuration file. Annotations can be converted to ASCII text by our tool bigBedToBed which can be compiled from the source code or downloaded as a precompiled binary for your system. Instructions for downloading source code and binaries can be found here. The tool can also be used to obtain only features within a given range, for example: bigBedToBed http://hgdownload.soe.ucsc.edu/gbdb/calJac4/uniprot/unipStruct.bb -chrom=chr6 -start=0 -end=1000000 stdout Please refer to our mailing list archives for questions, or our Data Access FAQ for more information. Lifting from UniProt to genome coordinates in pipelines To facilitate mapping protein coordinates to the genome, we provide the alignment files in formats that are suitable for our command line tools. Our command line programs liftOver or pslMap can be used to map coordinates on protein sequences to genome coordinates. The filenames are unipToGenome.over.chain.gz (liftOver) and unipToGenomeLift.psl.gz (pslMap). Example commands: wget -q https://hgdownload.soe.ucsc.edu/goldenPath/archive/hg38/uniprot/2022_03/unipToGenome.over.chain.gz wget -q https://hgdownload.soe.ucsc.edu/admin/exe/linux.x86_64/liftOver chmod a+x liftOver echo 'Q99697 1 10 annotationOnProtein' &gt; prot.bed liftOver prot.bed unipToGenome.over.chain.gz genome.bed cat genome.bed Credits This track was created by Maximilian Haeussler at UCSC, with a lot of input from Chris Lee, Mark Diekhans and Brian Raney, feedback from the UniProt staff, Alejo Mujica, Regeneron Pharmaceuticals and Pia Riestra, GeneDx. Thanks to UniProt for making all data available for download. References UniProt Consortium. Reorganizing the protein space at the Universal Protein Resource (UniProt). Nucleic Acids Res. 2012 Jan;40(Database issue):D71-5. PMID: 22102590; PMC: PMC3245120 Yip YL, Scheib H, Diemand AV, Gattiker A, Famiglietti LM, Gasteiger E, Bairoch A. The Swiss-Prot variant page and the ModSNP database: a resource for sequence and structure information on human protein variants. Hum Mutat. 2004 May;23(5):464-70. PMID: 15108278 
unipConflict Seq. Conflicts UniProt Sequence Conflicts Genes and Gene Predictions 
unipRepeat Repeats UniProt Repeats Genes and Gene Predictions 
unipStruct Structure UniProt Protein Primary/Secondary Structure Annotations Genes and Gene Predictions 
unipOther Other Annot. UniProt Other Annotations Genes and Gene Predictions 
unipMut Mutations UniProt Amino Acid Mutations Genes and Gene Predictions 
unipModif AA Modifications UniProt Amino Acid Modifications Genes and Gene Predictions 
unipDomain Domains UniProt Domains Genes and Gene Predictions 
unipDisulfBond Disulf. Bonds UniProt Disulfide Bonds Genes and Gene Predictions 
unipChain Chains UniProt Mature Protein Products (Polypeptide Chains) Genes and Gene Predictions 
unipLocCytopl Cytoplasmic UniProt Cytoplasmic Domains Genes and Gene Predictions 
unipLocTransMemb Transmembrane UniProt Transmembrane Domains Genes and Gene Predictions 
unipInterest Interest UniProt Regions of Interest Genes and Gene Predictions 
unipLocExtra Extracellular UniProt Extracellular Domain Genes and Gene Predictions 
unipLocSignal Signal Peptide UniProt Signal Peptides Genes and Gene Predictions 
unipAliTrembl TrEMBL Aln. UCSC alignment of TrEMBL proteins to genome Genes and Gene Predictions 
unipAliSwissprot SwissProt Aln. UCSC alignment of SwissProt proteins to genome (dark blue: main isoform, light blue: alternative isoforms) Genes and Gene Predictions 
uwIsoSeq UW Iso-Seq University of Washington Iso-Seq Mappings mRNA and EST Description These tracks show the Iso-Seq long read alignments of marmoset cDNAs to the genome. The data set consists eleven tissue samples from two individuals. Display Conventions and Configuration These track use the BAM Display Conventions and Configuration. Methods Generation of Full Length cDNA and Library Preparation for Sequencing Full-length cDNA was prepared and sequenced from total RNA isolated from various tissues of both a two year old male and a two year old female Callithrix jacchus. Iso-Seq library production was performed as per the Iso-Seq Express protocol (https://www.pacb.com/wp-content/uploads/Procedure-Checklist-IsoSeq-Express-Template-Preparation-for-Sequel-and-Sequel-II-Systems.pdf) and barcoded using barcoded adapters. One library was generated for each tissue. Sequencing with the PacBio Sequel II Platform Libraries were pooled equimolar and sequenced on 3 SMRT Cell 8M on the Sequel II platform with chemistry version 2EA. Data Processing Collected data was demultiplexed with lima (demultiplex barcoding), then analyzed with CCS with a requirement of 1 minimum pass and at least 0.9 identity (--minPasses 1 --min-rq 0.9). The Iso-Seq analysis pipeline was used to generate FLNC reads ensuring each has a poly-A tail, plus a single 3' and 5' primer signal for downstream analysis. Mapping Resulting reads were aligned to the marmoset genome with minimap2 2.17-r941 using the options -t 12 -ax splice:hq -u. Data Access The genomic alignments are stored in a BAM file that can be obtained from the download server. Credits Samples were provided from the New England Primate Research Center by Ricardo del Rosario and Anna Newman of the Broad Institute. Iso-Seq sequencing & FLNC analysis performed by: Evan Eichler, Alexandra Lewis, Shwetha Murali, and Katherine Munson of the University of Washington. References Warren WC, Harris RA, Haukness M, Fiddes IT, Murali SC, Fernandes J, Dishuck PC, Storer JM, Raveendran M, Hillier LW et al. Sequence diversity analyses of an improved rhesus macaque genome enhance its biomedical utility. Science. 2020 Dec 18;370(6523). PMID: 33335035; PMC: PMC7818670 
uwIsoSeq_SRR11734395_3 Iso-Seq Muscle (3) UW Iso-Seq Muscle SRR11734395 (SMRTCell 3) mRNA and EST 
uwIsoSeq_SRR11734395_2 Iso-Seq Muscle (2) UW Iso-Seq Muscle SRR11734395 (SMRTCell 2) mRNA and EST 
uwIsoSeq_SRR11734136_3 Iso-Seq Liver (3) UW Iso-Seq Liver SRR11734136 (SMRTCell 3) mRNA and EST 
uwIsoSeq_SRR11734136_1 Iso-Seq Liver (1) UW Iso-Seq Liver SRR11734136 (SMRTCell 1) mRNA and EST 
uwIsoSeq_SRR11734145_3 Iso-Seq Kidney (3) UW Iso-Seq Kidney SRR11734145 (SMRTCell 3) mRNA and EST 
uwIsoSeq_SRR11734145_2 Iso-Seq Kidney (2) UW Iso-Seq Kidney SRR11734145 (SMRTCell 2) mRNA and EST 
uwIsoSeq_SRR11734243_3 Iso-Seq Heart (3) UW Iso-Seq Heart SRR11734243 (SMRTCell 3) mRNA and EST 
uwIsoSeq_SRR11734243_2 Iso-Seq Heart (2) UW Iso-Seq Heart SRR11734243 (SMRTCell 2) mRNA and EST 
uwIsoSeq_SRR11734146_3 Iso-Seq Visualcortex (3) UW Iso-Seq Visualcortex SRR11734146 (SMRTCell 3) mRNA and EST 
uwIsoSeq_SRR11734146_1 Iso-Seq Visualcortex (1) UW Iso-Seq Visualcortex SRR11734146 (SMRTCell 1) mRNA and EST 
uwIsoSeq_SRR11734242_3 Iso-Seq Thalamus (3) UW Iso-Seq Thalamus SRR11734242 (SMRTCell 3) mRNA and EST 
uwIsoSeq_SRR11734242_2 Iso-Seq Thalamus (2) UW Iso-Seq Thalamus SRR11734242 (SMRTCell 2) mRNA and EST 
uwIsoSeq_SRR11735653_3 Iso-Seq Striatum (3) UW Iso-Seq Striatum SRR11735653 (SMRTCell 3) mRNA and EST 
uwIsoSeq_SRR11735653_1 Iso-Seq Striatum (1) UW Iso-Seq Striatum SRR11735653 (SMRTCell 1) mRNA and EST 
uwIsoSeq_SRR11734138_3 Iso-Seq Prefrontalcortex (3) UW Iso-Seq Prefrontalcortex SRR11734138 (SMRTCell 3) mRNA and EST 
uwIsoSeq_SRR11734138_1 Iso-Seq Prefrontalcortex (1) UW Iso-Seq Prefrontalcortex SRR11734138 (SMRTCell 1) mRNA and EST 
uwIsoSeq_SRR11734177_3 Iso-Seq Hippocampus (3) UW Iso-Seq Hippocampus SRR11734177 (SMRTCell 3) mRNA and EST 
uwIsoSeq_SRR11734177_1 Iso-Seq Hippocampus (1) UW Iso-Seq Hippocampus SRR11734177 (SMRTCell 1) mRNA and EST 
uwIsoSeq_SRR11734396_3 Iso-Seq Cerebellum (3) UW Iso-Seq Cerebellum SRR11734396 (SMRTCell 3) mRNA and EST 
uwIsoSeq_SRR11734396_2 Iso-Seq Cerebellum (2) UW Iso-Seq Cerebellum SRR11734396 (SMRTCell 2) mRNA and EST 
windowmaskerSdust WM + SDust Genomic Intervals Masked by WindowMasker + SDust Variation and Repeats Description This track depicts masked sequence as determined by WindowMasker. The WindowMasker tool is included in the NCBI C++ toolkit. The source code for the entire toolkit is available from the NCBI FTP site. Methods To create this track, WindowMasker was run with the following parameters: windowmasker -mk_counts true -input calJac4.fa -output wm_counts windowmasker -ustat wm_counts -sdust true -input calJac4.fa -output repeats.bed The repeats.bed (BED3) file was loaded into the &quot;windowmaskerSdust&quot; table for this track. References Morgulis A, Gertz EM, Sch&auml;ffer AA, Agarwala R. WindowMasker: window-based masker for sequenced genomes. Bioinformatics. 2006 Jan 15;22(2):134-41. PMID: 16287941 
chainNetMacFas5 Crab-eating macaque Chain/Net Crab-eating macaque (Jun. 2013 (Macaca_fascicularis_5.0/macFas5)), Chain and Net Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of crab-eating macaque (Jun. 2013 (Macaca_fascicularis_5.0/macFas5)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both crab-eating macaque and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the crab-eating macaque assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best crab-eating macaque/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The crab-eating macaque sequence used in this annotation is from the Jun. 2013 (Macaca_fascicularis_5.0/macFas5) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the crab-eating macaque/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single crab-eating macaque chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMacFas5Viewnet Net Crab-eating macaque (Jun. 2013 (Macaca_fascicularis_5.0/macFas5)), Chain and Net Alignments Comparative Genomics 
netMacFas5 Crab-eating macaque Net Crab-eating macaque (Jun. 2013 (Macaca_fascicularis_5.0/macFas5)) Alignment Net Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of crab-eating macaque (Jun. 2013 (Macaca_fascicularis_5.0/macFas5)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both crab-eating macaque and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the crab-eating macaque assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best crab-eating macaque/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The crab-eating macaque sequence used in this annotation is from the Jun. 2013 (Macaca_fascicularis_5.0/macFas5) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the crab-eating macaque/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single crab-eating macaque chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMacFas5Viewchain Chain Crab-eating macaque (Jun. 2013 (Macaca_fascicularis_5.0/macFas5)), Chain and Net Alignments Comparative Genomics 
chainMacFas5 Crab-eating macaque Chain Crab-eating macaque (Jun. 2013 (Macaca_fascicularis_5.0/macFas5)) Chained Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of crab-eating macaque (Jun. 2013 (Macaca_fascicularis_5.0/macFas5)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both crab-eating macaque and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the crab-eating macaque assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best crab-eating macaque/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The crab-eating macaque sequence used in this annotation is from the Jun. 2013 (Macaca_fascicularis_5.0/macFas5) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the crab-eating macaque/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single crab-eating macaque chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMm10 mm10 ChainNet Mouse (Dec. 2011 (GRCm38/mm10)), Chain and Net Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of mouse (Dec. 2011 (GRCm38/mm10)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both mouse and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the mouse assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best mouse/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The mouse sequence used in this annotation is from the Dec. 2011 (GRCm38/mm10) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the mouse/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single mouse chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMm10Viewnet Net Mouse (Dec. 2011 (GRCm38/mm10)), Chain and Net Alignments Comparative Genomics 
netMm10 Mouse Net Mouse (Dec. 2011 (GRCm38/mm10)) Alignment Net Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of mouse (Dec. 2011 (GRCm38/mm10)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both mouse and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the mouse assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best mouse/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The mouse sequence used in this annotation is from the Dec. 2011 (GRCm38/mm10) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the mouse/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single mouse chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMm10Viewchain Chain Mouse (Dec. 2011 (GRCm38/mm10)), Chain and Net Alignments Comparative Genomics 
chainMm10 Mouse Chain Mouse (Dec. 2011 (GRCm38/mm10)) Chained Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of mouse (Dec. 2011 (GRCm38/mm10)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both mouse and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the mouse assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best mouse/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The mouse sequence used in this annotation is from the Dec. 2011 (GRCm38/mm10) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the mouse/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single mouse chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMm39 Mouse Chain/Net Mouse (Jun. 2020 (GRCm39/mm39)), Chain and Net Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of mouse (Jun. 2020 (GRCm39/mm39)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both mouse and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the mouse assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best mouse/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The mouse sequence used in this annotation is from the Jun. 2020 (GRCm39/mm39) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the mouse/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single mouse chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMm39Viewnet Net Mouse (Jun. 2020 (GRCm39/mm39)), Chain and Net Alignments Comparative Genomics 
netMm39 Mouse Net Mouse (Jun. 2020 (GRCm39/mm39)) Alignment Net Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of mouse (Jun. 2020 (GRCm39/mm39)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both mouse and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the mouse assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best mouse/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The mouse sequence used in this annotation is from the Jun. 2020 (GRCm39/mm39) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the mouse/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single mouse chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetMm39Viewchain Chain Mouse (Jun. 2020 (GRCm39/mm39)), Chain and Net Alignments Comparative Genomics 
chainMm39 Mouse Chain Mouse (Jun. 2020 (GRCm39/mm39)) Chained Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of mouse (Jun. 2020 (GRCm39/mm39)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both mouse and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the mouse assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best mouse/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The mouse sequence used in this annotation is from the Jun. 2020 (GRCm39/mm39) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the mouse/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single mouse chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetHg38 Human Chain/Net Human (Dec. 2013 (GRCh38/hg38)), Chain and Net Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of human (Dec. 2013 (GRCh38/hg38)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both human and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the human assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best human/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The human sequence used in this annotation is from the Dec. 2013 (GRCh38/hg38) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the human/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single human chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetHg38Viewnet Net Human (Dec. 2013 (GRCh38/hg38)), Chain and Net Alignments Comparative Genomics 
netHg38 Human Net Human (Dec. 2013 (GRCh38/hg38)) Alignment net Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of human (Dec. 2013 (GRCh38/hg38)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both human and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the human assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best human/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The human sequence used in this annotation is from the Dec. 2013 (GRCh38/hg38) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the human/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single human chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961 
chainNetHg38Viewchain Chain Human (Dec. 2013 (GRCh38/hg38)), Chain and Net Alignments Comparative Genomics 
chainHg38 Human Chain Human (Dec. 2013 (GRCh38/hg38)) Chained Alignments Comparative Genomics Description This track shows regions of the genome that are alignable to other genomes (&quot;chain&quot; subtracks) or in synteny (&quot;net&quot; subtracks). The alignable parts are shown with thick blocks that look like exons. Non-alignable parts between these are shown like introns. Chain Track The chain track shows alignments of human (Dec. 2013 (GRCh38/hg38)) to the marmoset genome using a gap scoring system that allows longer gaps than traditional affine gap scoring systems. It can also tolerate gaps in both human and marmoset simultaneously. These &quot;double-sided&quot; gaps can be caused by local inversions and overlapping deletions in both species. The chain track displays boxes joined together by either single or double lines. The boxes represent aligning regions. Single lines indicate gaps that are largely due to a deletion in the human assembly or an insertion in the marmoset assembly. Double lines represent more complex gaps that involve substantial sequence in both species. This may result from inversions, overlapping deletions, an abundance of local mutation, or an unsequenced gap in one species. In cases where multiple chains align over a particular region of the marmoset genome, the chains with single-lined gaps are often due to processed pseudogenes, while chains with double-lined gaps are more often due to paralogs and unprocessed pseudogenes. In the &quot;pack&quot; and &quot;full&quot; display modes, the individual feature names indicate the chromosome, strand, and location (in thousands) of the match for each matching alignment. Net Track The net track shows the best human/marmoset chain for every part of the marmoset genome. It is useful for finding syntenic regions, possibly orthologs, and for studying genome rearrangement. The human sequence used in this annotation is from the Dec. 2013 (GRCh38/hg38) assembly. Display Conventions and Configuration Chain Track By default, the chains to chromosome-based assemblies are colored based on which chromosome they map to in the aligning organism. To turn off the coloring, check the &quot;off&quot; button next to: Color track based on chromosome. To display only the chains of one chromosome in the aligning organism, enter the name of that chromosome (e.g. chr4) in box next to: Filter by chromosome. Net Track In full display mode, the top-level (level 1) chains are the largest, highest-scoring chains that span this region. In many cases gaps exist in the top-level chain. When possible, these are filled in by other chains that are displayed at level 2. The gaps in level 2 chains may be filled by level 3 chains and so forth. In the graphical display, the boxes represent ungapped alignments; the lines represent gaps. Click on a box to view detailed information about the chain as a whole; click on a line to display information about the gap. The detailed information is useful in determining the cause of the gap or, for lower level chains, the genomic rearrangement. Individual items in the display are categorized as one of four types (other than gap): Top - the best, longest match. Displayed on level 1. Syn - line-ups on the same chromosome as the gap in the level above it. Inv - a line-up on the same chromosome as the gap above it, but in the opposite orientation. NonSyn - a match to a chromosome different from the gap in the level above. Methods Chain track Transposons that have been inserted since the human/marmoset split were removed from the assemblies. The abbreviated genomes were aligned with lastz, and the transposons were added back in. The resulting alignments were converted into axt format using the lavToAxt program. The axt alignments were fed into axtChain, which organizes all alignments between a single human chromosome and a single marmoset chromosome into a group and creates a kd-tree out of the gapless subsections (blocks) of the alignments. A dynamic program was then run over the kd-trees to find the maximally scoring chains of these blocks. The following matrix was used: &nbsp;ACGT A91-114-31-123 C-114100-125-31 G-31-125100-114 T-123-31-11491 Chains scoring below a minimum score of &quot;3000&quot; were discarded; the remaining chains are displayed in this track. The linear gap matrix used with axtChain: -linearGap=medium tableSize 11 smallSize 111 position 1 2 3 11 111 2111 12111 32111 72111 152111 252111 qGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 tGap 350 425 450 600 900 2900 22900 57900 117900 217900 317900 bothGap 750 825 850 1000 1300 3300 23300 58300 118300 218300 318300 Net track Chains were derived from lastz alignments, using the methods described on the chain tracks description pages, and sorted with the highest-scoring chains in the genome ranked first. The program chainNet was then used to place the chains one at a time, trimming them as necessary to fit into sections not already covered by a higher-scoring chain. During this process, a natural hierarchy emerged in which a chain that filled a gap in a higher-scoring chain was placed underneath that chain. The program netSyntenic was used to fill in information about the relationship between higher- and lower-level chains, such as whether a lower-level chain was syntenic or inverted relative to the higher-level chain. The program netClass was then used to fill in how much of the gaps and chains contained Ns (sequencing gaps) in one or both species and how much was filled with transposons inserted before and after the two organisms diverged. Credits Lastz (previously known as blastz) was developed at Pennsylvania State University by Minmei Hou, Scott Schwartz, Zheng Zhang, and Webb Miller with advice from Ross Hardison. Lineage-specific repeats were identified by Arian Smit and his RepeatMasker program. The axtChain program was developed at the University of California at Santa Cruz by Jim Kent with advice from Webb Miller and David Haussler. The browser display and database storage of the chains and nets were created by Robert Baertsch and Jim Kent. The chainNet, netSyntenic, and netClass programs were developed at the University of California Santa Cruz by Jim Kent. References Harris, R.S. (2007) Improved pairwise alignment of genomic DNA Ph.D. Thesis, The Pennsylvania State University Chiaromonte F, Yap VB, Miller W. Scoring pairwise genomic sequence alignments. Pac Symp Biocomput. 2002:115-26. PMID: 11928468 Kent WJ, Baertsch R, Hinrichs A, Miller W, Haussler D. Evolution's cauldron: duplication, deletion, and rearrangement in the mouse and human genomes. Proc Natl Acad Sci U S A. 2003 Sep 30;100(20):11484-9. PMID: 14500911; PMC: PMC208784 Schwartz S, Kent WJ, Smit A, Zhang Z, Baertsch R, Hardison RC, Haussler D, Miller W. Human-mouse alignments with BLASTZ. Genome Res. 2003 Jan;13(1):103-7. PMID: 12529312; PMC: PMC430961